Shandong Mgreenbelt Machinery Co.,Ltd

INDUSTRIAL WATER CHILLER for Plastic extrusion machine process PVC pipe with chilling water system,

Plastic extrusion processes require chilled water to cool the water tank down to the proper temperature and furthermore to cool the output plastic products, which will pass through the water tank, last to improve quality and decrease scrap.

Features:

Cooling capacity: 44kw – 800kw( 15 tons – 225 tons).

Refrigerant R22, R407C, R134A or R410A.

Screw compressors normally employed for medium to large cooling capacity, BITZER, HANBELL for options, the output power of screw compressor can be controlled automatically by control system. Furthermore, there are four phases for choosing: 25%-50%-75%-100%. And the motor of the screw compressor is star delta start to reduce the impact on power grid. 

Shell and Tube type condenser is normally called water cooled type,this series chiller need to employ water cooling tower to discharge the heat, which is always used for large cooling capacity or the local place temperature is higher than 40 degree celsius. 

Adopt microcomputer controller, display the temperature ,protect, fault code and etc to the control panel, easy to operate, PLC for options.

The electric components we use SCHNEIDER brand, as you know the electricity is very important for the chiller, also affect the safety of the operator, schneider is what we trust. 

High efficient shell and tube type evaporator and condenser to save 30% energy.

Refrigerating system welded with oxygen free method ,to reduce oxides and ensure the smooth surface.